Walksnail WS-M181 GPS อุปกรณ์โดรน Drone
Product Description
Bullet Point - With small size light weight fast positioning and stable connection. It is suitable for FPV RC airplane quadcopter and others to enhance the flight experience.
- Featuring the u-blox M10 platform UBX-M10050 GNSS chipset and BUILT-IN QMC5883 MAG the module offers stronger performance and more accurate positioning.
- The ultra-thin ceramic antenna uses a special spray painting process to prevent oxidation and scratching ensuring consistent positioning performance.
- The built-in battery can realize hot start and realize positioning quickly.
- It offers six positioning modes providing more flexible combinations (default GPS + GLONASS + BDS multi-mode positioning).The measured maximum number of search sats can cover 32pcs.
Note:
Because the GPS chip is a new 10th generation chip the flight controller needs to flash firmware Betaflight 4.3.0 and above and the firmware below 4.29 uses the NMEA protocol.
Specification
name Walksnail WS-M181GPS
Chip: M10 (ten generation chip)
Frequency: GPS L1GLONASS L1BDSB1GALILEO E1SBAS L1.QZSS L1
Power: 5V
Size: 18mm*18mm*4.6mm
Antenna: ceramic antenna (oil spraying process prevent scratching and oxidation)
Receiving channels: 72 search channels
Compass： QMC5883
Baud rate: 115200dps
Output protocol: NMEA UBLOX (dual protocol)
Output frequency: 1Hz-10Hz Default 10Hz
Speed accuracy: 0.05m/s
Horizontal positioning accuracy: 2D ACC1.5m(open air)
Receiving sensitivity: Trace-162dBm
Capture -160dBm
Dynamic characteristics:
Altitude: 50000m
Speed: 500m/s
Acceleration: 4G
Operating temperature: -40℃-+85℃
Storage temperature:
(5)
(4.56)